Tuesday, October 27, 2009

The next costume- storm trooper

Ok, well I have always been impressed with the whole TK storm trooper armor thing, it always looks impressive

- Posted using BlogPress from my iPhone

HIPS TK Stormtrooper - Glue showdown

The following is based on my experiences building a locally (Australian) made TK storm trooper kit moulded using HIPS high impact polystyrene and products that are easily sourced in most Melbourne hobby shops.

One of the problems I realized I would have when I started to assemble my kit was that some of the pieces did not line up perfectly with their counterpart and that any adhesive would need to be pretty good and flexible to deal with the stress when the parts are stretched onto place. Also hips seems to be a bit more brittle than ABS be it lighter and nicer looking in finish. This in my limited experience had both advantages and disadvantages.

When I asked my supplier of the kit (mouldman) what glue I should use with this I was a little supprised when he responded with "selleys superglue" as my experiences with superglue was that it is brittle and hopeless with plastic, but alas it does work, mostly because it's acetone based. But still needing more convincing I purchased every product I could find in both a hardware store and a hobby shop that looked like it could work including superglue.

In no particular order:

A) Plastruck plastic weld
B) Selleys shock proof super glue
C) Selleys super glue in a bottle
D) Revell plastic model cement
E) loctite "all plastic" super glue

I then proceeded to test the product on some of the offcuts from trimming the kit.

- Posted using BlogPress from my iPhone

Tuesday, October 20, 2009

Armageddon Melbourne 2009

Well this weekend was the first time I have ever been to a comic con kinda convention and it was totally awesome.

I have a few favourite memories from the weekend but on all it was the passion and outright talent exhibited by all the costumers that showed, and I was really only there for 4 to 5 hours on Saturday, so I'm sure there where plenty more that I didn't see.

Unfortunately I never got around to finishing (there is one in the works) a new costume for the event and showed up in my by now trusty Alema Rar, twi'lek Jedi which has served me well for a number of troops at science works. I shouldn't be disappointed as I still really love this costume and have worked out pretty much all of the kinks.

I think the think that I have most noticed with costuming is that not only is it very addictive, but the urge to try bigger, better, more elaborate costumes is very strong.

I will post a link to some pics just as soon as I figure out how from an iPhone.

- Posted using BlogPress from my iPhone

Wednesday, September 16, 2009

Jedi Twi'lek Costume

As far as i can tell there are three main things to get right in order to perfect the Twi’lek Jedi costume: The Lekku, the makeup and the Jedi garb itself.

The Lekku
As i mentioned earlier, I did not make my own Lekku, but through contacts in the Rebel Legion managed to find someone who seems to have perfected the art of making them and will make them for others for a reasonable fee. The other part of the headpiece can also be the headband, and again, i resorted to purchasing a replica Aalya Secura headband and then making some minor modifications to it.
One of the things I was the happiest with was my decision to use a combination of cloth tape, and self adhesive Velcro as a means to secure the Lekku to the headband (seen above) and prevent it from sliding back, which will happen because of the weight, especially if you run (that’s another story)

The makeup
Although this might seem like it would be the easiest part to get right, its supprising how much time and effort will go into trying to get the correct colour and the correct makeup for the given situation. My first costume, the Pantoran X-wing pilot used blue Kryolan water based cosmetics, called Aqua. If you live in Melbourne, you can purchase these from their retail store at 147 Little Collins street Melbourne VIC 3000 (They used to be also known as "Backstage Makeup"). A small tub will cost $14, and a large one $33. You may want to purchase a dark colour or black should you want to highlight lips and eyes.
One of the main things you will need to weigh up is how easy or hard you will want the makeup to stay on and the type of environment you are likely to use them in. For example, the aqua variety are fine as long as its not too hot and you don’t sweat too much. Plus you can also get spray on sealer, but this is also water based and fairly expensive. As i type this I am about to embark on a journey into the oil based variety as we enter the summer months and I find the aqua solution not as good, especially on certain parts of the body.

For the Pantoran i used I use the Kryolan Aqua 093 as well as 501. For the Twi’lek, I think the 501 is way too dark, but I know a girl who uses that colour and it seems to work well for her, so i guess its a personal thing.

The Jedi Garb
It should be noted that because my costume does not have a robe it does not qualify as a formal costume for rebel legion. And the one thing i still have to figure out is how to make a robe that will also accommodate the lekku. I suspect this will be another topic one day soon.
Rather than sew the entire costume from scratch, which would probably produced a better finished product I decided that I would order a complete mace windu costume from costumebase in Singapore and try to modify that. The main reason for me doing this wasn’t so much that Im lazy and cant sew very well (although that is a factor) its because when i went on ebay looking for a Jedi belt which is something im pretty sure i couldn’t just make, i found that the cost of purchasing a belt on its own and getting the entire costume wasn’t as big a difference once shipping was included and i thought that in the worst case scenario, i could just give the costume away or modify it for my little boy to wear. However once i got it, i realised with some modifications the main robe and tunics would do nicely for my costume. There where two things that needed to be taken in. As the robe is made for a male, the front overlap has been designed to wrap over the wrong side for a female, and this needed to be taken in. Also, the collar was cut for a male with very wide shoulders and that needed adjustment also.

If you can see the photo above, i took in about an inch or in some parts more all the way around. This does cause some problems with the lines of the tunic, but i think i was able to get away with it, be it far from perfect.
The tabarbs also are a tad too wide for a female in my opinion, so these had to be narrowed by about an inch.

The next was the tabarb thing that goes under the belt. I had decided that i wanted some contrast with the traditional shades of brown and tan. So i had decided to go with a deep purple and made this from scratch.

Sunday, September 6, 2009

The Twi'lek Jedi

Well, it all started about 6 months ago when I meet a costumer at scienceworks who did a pretty awesome twi'lek X-wing pilot. Anyway I was inspired to try to do a twi'lek but was not sure about making the lekku and wasnt so sure of copying her idea and being an X-wing pilot, as "april storm" was already a pantoran x-wing pilot and it wouldnt make much sence if it was just the same costume with a different species.

The biggest problem was really the Lekku. I looked on ebay with no luck at finding anything reasonable. But i later found out through the rebel legion that Pam was "the" person to get your lekku from. http://chucrew.com/Twilek/Twilek.htm

Anyway, about two months later i had my Lekku, but needed the rest of the costume, for I had decided on a Twi'lek Jedi

Sunday, August 2, 2009

Ah, I almost forgot about this one

Well, on my first post I said that the X-wing pilot costume was my first, well, thats not strictly true. You see a while ago, I did do a Princess Leia costume for my 32nd Birthday and well just plain forgot.
Princess Leia Princess Leia
Technically I dont think its screen accurate enough to qualify for the Legion, but hey, it was heaps of fun, and I even managed not to get wine stains on it, which was no trivial feat.

Tuesday, July 28, 2009

X-wing pilot leg flares - first attempt

Ok, well this is my first attempt at making leg flares for my X-wing pilot costume, so its far from perfect, but I think it more or less works.

Firstly, its a bit of a challenge finding all the correct parts to make it, especially:
  • Finding the correct colour webbing to use. I found that an army disposals store was the only place i could find something close.
  • Finding something similar to use as actual flares. I know that other pilots have used dowels with a coat of silver paint, but I prefered to look for something metal.
  • Then coming up with some way to make it all hang together and making it practical at the same time.
This is what I came up with: The flares are actually tent pole joiners, you should be able to get them from most places that sell tent stuff.
Firstly you need to ensure that the webbing is the correct width, in this case approximately 4 inches wide. To achieve this i sewed two pieces together and used the flares as a guide. At this point I also measured the circumference of my leg and sewed on Velcro appropriately.

The next thing that was needed was to mark out where the flares would actually sit with a pencil when evenly spaced.

The next step was to sew on some elastic. The colour isnt actually correct i know, but the intention was to cover the elastic with more webbing, but alas I didnt purchase enough. The trick with sewing elastic for this purpose is to ensure that the flares still fit and will not just fall out as you walk.
Well this is the finished product. Only one problem? There are meant to be 8 Flares not just 6. Doh so I had to do it all again!

Monday, July 27, 2009

Pantoran X-wing Pilot at Scienceworks

Well, this is officially my first Star Wars costume ever. And well its come along way from the first time I tried to do this back in mid June.

At first I wasnt sure if people would get the whole Pantoran X-wing pilot, or if the Rebel Legion would accept it. But I've been formally approved so they must have. I doubt there are too many other female Pantoran X-Wing pilots about, but perhaps with the pantoran presense in "Clone Wars" we may see more.

These are some photos from the weekend at the Star Wars exhibition at Scienceworks (part of Museum Victoria) I brought in my lightsaber as the kids really got a kick out of light sabers even though it really doesnt go with the costume. So i guess im a Jedi/Pilot in these shots? :-)

I still need to finish off my Helmet. When I registered with the Legion it was all intact, but as it was a rubies helmet, it was in Luke Skywalker's colours, so I recently redid it with blue Pantoran markings. I will post its progress shortly, was its almost complete.

There is also the question of the leg flares. I havent got enough (shock horror)